Airmar Transducers

The DST810 is a plastic thru-hull smart sensor that will provide digital depth(numbers only), speed and temp to any existing NMEA 2K network.

The DT812 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

The DT820 is a flush mount, plastic thru-hull smart sensor that will provide digital depth(numbers only) and temp to any existing NMEA 2K network.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) No Connector, For Bare Wire Install.

The Airmar TM265C-LH Transom Mount Chirp Transducer operates over a broad range of frequencies to provide the user with high quality imaging. Compatible with Garmin GSD26, Furuno DFF1-UHD, Navico BSM-2 and Navico BSM-3.

The Airmar TM265C-LM Transom Mount Chirp Transducer operates over a broad range of frequencies to provide the user with high quality imaging. Compatible with Garmin GSD26, Raymaine C450 and Simrad BSM2.

This NMEA 2000 P79 In Hull (up to 22 degree deadrise) smart sensor provides digital depth to any existing NMEA 2000 network. The P79 includes a 6 Meter NMEA 2000 cable and NMEA 2000 T Connector.

Airmar B175 1kW high-wide frequency CHIRP transducer, bare wire connection (adapter, wiring block required) Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

The Airmar B275C-LH-W CHIRP Transducer is ideal in shallow to deep water applications. With its Wide Beam Angle the B275 provides 2x the coverage under the boat when compared with the other CHIRP transducers on the market today. (Low and High Frequencies, Depth and Temp) Comes with 12-Pin Connector for Garmin.

Airmar B175 1kW low frequency CHIRP transducer, Mix-and-Match End with no Mix-and-Match cable included. Can also be used for bare wire connection by cutting end and exposing wires. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW medium frequency CHIRP transducer, Mix-and-Match End with no Mix-and-Match cable included. Can also be used for bare wire connection by cutting end and exposing wires. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar Low Profile 20 degree tilt Medium Frequency CHIRP transducer. No Connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 

The R509C-LH CHIRP Thru-Hull Transducer is designed for ultimate performance. The sheer size of the R509 gives you an idea of what size boat it is designed for, recommended for vessels 40' and up. Comes with high-performance fairing block.

The R409C-LWM CHIRP Thru-Hull Transducer is designed for ultimate performance. Recommended for vessels 40' and up, the tournament series 409 has an ultra wide beam for even more bottom coverage. Comes with high-performance fairing block.

Bronze Thru-Hull Water Temperature Sesnsor without connector. Provides water temperature to ±0.3°C (±0.17°F) precision. Temperature data is output to a chart plotter, radar screen, digital display or computer.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. 8-Pin Garmin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. 12-Pin Garmin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar Low Profile Bronze 12 degree tilt, High Frequency CHIRP transducer. Navico 9-Pin XSONIC Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.

The DST810 is a Bronze thru-hull smart sensor that will provide digital depth (numbers only), speed and temp to any existing NMEA 2K network.

The R509C-LHW (Low, High Frequency, Wide Beam) CHIRP 3kW Thru-Hull Transducer is designed for ultimate performance. The sheer size of the R509 gives you an idea of what size boat it is designed for, recommended for vessels 40' and up. Comes with high-performance fairing block.

Airmar Low Profile Bronze 20 degree tilt, High Frequency CHIRP transducer. 9-Pin Navico XSONIC Mix and Match Cable Included.

Airmar Low Profile Bronze 20 degree tilt, Medium Frequency CHIRP transducer. Garmin 8-Pin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Garmin 8-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Garmin 8-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Furuno 12-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar Low Profile Bronze 20 degree tilt, High Frequency CHIRP transducer. 10-Pin Furuno Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Garmin 12-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, Furuno 12-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15 degrees.

Airmar B175 1kW high-wide frequency CHIRP transducer, bronze thru-hull housing for vessels with deadrises of 8-15-degrees. 9-Pin Navico XSONIC Mix and Match Cable Included.

Airmar B175 1kW medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 12-Pin Garmin Mix and Match Cable Included.

Airmar Low Profile Bronze 20 degree tilt, High Frequency CHIRP transducer. 8-Pin Garmin Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees.

Furuno B175 1kW high-wide frequency CHIRP transducer, with 10-pin Furuno plug. Low profile, bronze thru-hull housing for vessels with deadrises of 16-24-degrees.

The Airmar TM275C-LHW Transom Mount Chirp Transducer operates over a broad range of frequencies to provide the user with high quality imaging. Compatible with Garmin GPSMAP 8600xsv Series, GSD 25 and GSD 26

Airmar B175 1kW high-wide frequency CHIRP transducer, Garmin 8-pin connector. Low profile, bronze thru-hull housing for vessels with deadrises of 0-7 degrees.

The Airmar DT800 is a thru hull smart sensor that connects to a NMEA 2000 network to provide numerical depth and temperature readings. This low-profile, retractable thru hill sensor operates on 235kHz frequency to prevent interference with other echosounders on the boat. Suitable for vessels with a deadrise 0-7 degrees. 

The Airmar P319 is a 50/200 kHz, 600W transducer providing depth and temperature readings. Includes 33 feet of transducer cable with Garmin 8-pin connector and suitable for boats with a deadrise of 0-7 Degrees.

Airmar Low Profile Bronze 12 degree tilt, High Wide Frequency CHIRP transducer. Navico 9-Pin XSONIC Mix and Match Cable Included. Low profile, bronze thru-hull housing for vessels with deadrises of 8-15-degrees.

Airmar SS175 1kW medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 8-Pin Garmin Mix and Match Cable Included.

Airmar SS75 600W medium frequency CHIRP transducer, low profile, bronze thru-hull housing for vessels with deadrises of 16-24 degrees. 8-Pin Garmin Mix and Match Cable Included.

The Airmar Mix and Match cable for Garmin 600W 6-Pin connects to a compatible Airmar Transducer with 5-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 6-pin sonar port.

The Airmar Mix and Match cable for Furuno CHIRP 10-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Furuno 10-pin sonar port.

The Airmar Mix and Match cable for SiTex CHIRP 8-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a SiTex 8-pin sonar port.

The Airmar Mix and Match cable for Navico (Simrad and Lowrance) Low Frequency CHIRP 9-Pin XSONIC connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Navico 9-pin XSONIC sonar port.

The Airmar Mix and Match cable for Garmin Low CHIRP 12-Pin connects to a compatible Airmar Transducer with 12-Pin Mix and Match connector (*Transducer Sold Separately) in order to provide the transducer with the correct plug to connect to a display with a Garmin 12-pin sonar port.

Airmar 1kW in hull, wide-beam, high-frequency CHIRP transducer. Navico 9-Pin XSonic Mix and Match Cable Included. Designed for boats up to 36' with a solid-fiberglass hull. The M285C-HW-9N does not provide speed or water temperature.

The Airmar R599LM is a 2-3kW low to medium frequency transducer delivering deep water performance down to 10,000'. The R599LM is an in-hull design and includes a tank which is cut to the boat's deadrise post purchase and affixed inside the hull.

The Airmar PM265LM CHIRP pocket mount transducer is a 1kW transducer with Navico (Simrad or Lowrance) 9-Pin Y-Cable Connector.

The Airmar M265C-LH Chirp Transducer uses Broadband CeramicTechnology for crystal clear image detail and resolution. Increased resolution allows you to easily distinguish individual fish targets in the water column or close on the bottom. (Low and High Frequencies, Depth Only) - 12-Pin Garmin Mix and Match Cable Included.