Marine Autopilots

The Garmin 1.2L Pump for the Reactor 40 Autopilot is designed as an affordable option for single-cylinder applications with cylinder volumes from 6 to 14 cubic inches. An autopilot pump is required to make a complete Reactor 40 Autopilot system.

The Raymarine Type 2 Pump for Autopilots is a Reversing hydraulic pump for use with steering systems equipped with 14–21 cubic inch (230-350cc) hydraulic steering rams.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The S100 gives you onboard basic control of your autopilot from remote locations on your boat. It is compatible with any Raymarine SeaTalk autopilot and will comunicate with the autopilot even if you are below deck.

The Raymarine Evolution EV200 Autopilot brings ease of installation, calibration and use, to the Autopilot market. With the EV1 Sensor Core, AC200 and P70Rs, your trips offshore will more relaxing and enjoyable.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Raymarine EV100 Autopilot is designed to steer your sail vessel for you. Designed for boats under 16,500 lbs, the EV100 is quick and easy to install and fits most type of wheels.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Furuno Navpilot 711C takes staying on course to the next level. With self-learning and adaptive software program for step by step calculations the NavPilot 711C takes important information into consideration and adjusts navigation accordingly to keep you on course. A Bright Colored Day/Night Graphic Display makes viewing easy no matter the time of day.
Pump Required, Sold Separately

Stay on course with Furuno’s Navpilot 711C-OB. Self-learning and adaptive software enables the 711C to keep you on course.  With real time dynamic adjustments, your vessels steering becomes more accurate. Bright Colored Day/Night Graphic Display makes viewing easy no matter the time of day.
Pump Required, Sold Separately

The Raymarine Evolution EV100 Autopilot is the perfect solution for vessels with single outboard engines and hydraulic steering. Packaged With the EV1 Sensor Core, AC100, P70Rs, 0.5ltr Hydraulic Pump and Evolution Cabling Kit this complete set-up is designed for boats with steering system fluid capacity of 3.1 cubic inches to 6.7 cubic inches.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

With a Si-Tex SP120 you get an easy to operate and reliable Autopilot for your inboard powered vessel. Designed for boats with hydraulic steering.

Garmin’s GHP Compact Reactor 40 is an affordable solution for Marine Autopilots! Perfect for single engine outboard boats under 25 feet. Simple installation and compatible with Garmin Chartplotters, the compact reactor40 is NMEA2000 certified enabling heading data to easily be shared with other devices on your NMEA2000 network.

Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.1 Cubic Inches Per Second For Ram Sizes of Up to 13 Cubic Inches in Volume

Furuno Autopilot Pump for NavPilot 711, 12 VDC, 1.7 Cubic Inches Per Second For Ram Sizes of 14 Cubic Inches to 25 Cubic Inches in Volume

Designed for hydraulic-steered outboard and sterndrive vessels up to 35 feet, the Simrad AP44 VRF Medium Pack comes with everything you need. Includes 4.1” color display, Pump-2 hydraulic steering pump, NAC-2 autopilot computer, Precision-9 solid-state compass, plus all necessary NMEA 2000 cables and connectors.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

Designed for hydraulic-steered outboard and sterndrive vessels up to 50 feet, the Simrad AP44 VRF High Pack comes with everything you need. Includes 4.1” color display, Pump-3 hydraulic steering pump, NAC-3 autopilot computer, Precision-9 solid-state compass, plus all necessary NMEA 2000 cables and connectors.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Raymarine Evolution EV200 Autopilot brings ease of installation, calibration and use, to the Autopilot market. With the EV1 Sensor Core, AC200, P70R and Type 1 Hydraulic Pump your trips offshore will more relaxing and enjoyable.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The NAC-2 Core Autopilot Core Pack from Simrad consists of the low-current NAC-2 autopilot computer, Precision-9 compass and RF-25 rudder feedback unit and is the perfect set-up for hydraulic and mechanical drives on smaller vessels up to 35’ in length.
Hydraulic Pump or Mechanical Drive Required
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

Simrad’s AP44 Autopilot Controller is perfect for the mariner interested in conveniently and easily controlling the functions of their autopilot. Rotary dial and button control, The AP44 has a 4.1-inch glass, color display. Simple setup and automatic tuning.
Autopilot Core Pack Required. Not Included and Sold Separately.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Raymarine EV150 Autopilot is a complete package and ready to install. The EV150 package is designed for 12V systems and includes a p70Rs autopilot controller, EV1 Sensor Core, ACU150 Actuator Control Unit, Type 1 Hydraulic Pump, and an Evolution autopilot cabling kit.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Raymarine! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

Simrad’s AP48 Autopilot Controller allows for complete control of your Simrad Autopilot. No Drift steering, depth contour tracking and automated turn patterns are all controlled from the 4.1” low profile, glass display.
Autopilot Core Pack Required. Not Included and Sold Separately.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The NAC-2 Core VRF Autopilot Core Pack from Simrad consists of the low-current NAC-2 autopilot computer, Precision-9 compass designed with Virtual Rudder Feedback. This is the perfect set-up for hydraulic and mechanical drives on smaller vessels up to 35’ in length and eliminates the need for a mechanical rudder feedback.
Hydraulic Pump or Mechanical Drive Required
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The NAC-3 Core Autopilot Core Pack from Simrad consists of the High-Current NAC-3 Autopilot Computer, Precision 9 Compass, Rf25N Rudder Feedback and NMEA2000 Starter Kit. Designed for vessels above 35’ in length.
Hydraulic Pump or Mechanical Drive Required
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The NAC-3 VRF Autopilot Core Pack from Simrad consists of the low-current NAC-3 autopilot computer, Precision-9 compass designed with Virtual Rudder Feedback for outboard boats. This is the perfect set-up for hydraulic and mechanical drives on larger vessels over 35’ in length and eliminates the need for a mechanical rudder feedback.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

Simrad's OP12 wired remote provides simple integration with Simrad autopilot systems to provide mode control, course adjustments, and power steering. The OP 12 remote can be combined with the IS42 Color Instrument Display as a standalone autopilot controller, or used as a dedicated autopilot keypad for GO, NSS and NSO evo2 multifunction displays.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Furuno NavPilot 300 with PG700 provides you with a new tool to make your day on the water more relaxing or help you hunt fish more effectively. Includes the Furuno PG700 for boats that don’t already have a heading sensor.
Requires Pump, Sold Separately

The Furuno NavPilot 300 provides you with a new tool to make your day on the water more relaxing or help you hunt fish more effectively. With Gesture Control you just simply point to where you want to go.
Requires Heading Sensor and Pump, Sold Separately.

Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 0.6 Cubic Inches per second (For Ram sizes less than 8 Cubic Inches in volume)

Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 1.0 Cubic Inches per second (For Ram sizes from 7-12 Cubic Inches in volume)

Furuno Autopilot Pump for NavPilot 300. This Pump made by Octopus gives a lot of performance at a low price. 12 VDC and 1.6 Cubic Inches per second (For Ram sizes from 12-23 Cubic Inches in volume)

The Sitex SP120CVF-2 Autopilot comes with a bright color display and is an ideal high performance autopilot for small to medium sized power boats, inboard or outboard. With virtual feedback, the SP120VF2 eliminates a rudder feedback.

Garmin’s Reactor 40 with SmartPump V2 takes the guess work out of autopilots! With a SmartPump V2 that works with most boats and applications, the V2 pump reduces its size overall and provides for optimum control and performance!

The Sitex SP70R Autopilot for Inboard vessels is exceptionally easy to use. Designed to use on inboard boats with single or twin Inboard engine application.
*Pump Required and not included.

The Furuno NavPilot 300 with PG700 and 1.0L Autopilot Pump Bundle features the standard Furuno Navpilot 300 with PG700 and a 1.0L Furuno Octopus Pump. Made for Outboard boats with Single Steering Cylinder.

With a Si-Tex SP120 Color Autopilot you get an easy to operate and reliable Autopilot that includes a 9-Axis Compass for your Type S Dash Drive vessel.

The Garmin 2L Pump for the Reactor 40 Autopilot is designed for boats with hydraulic steering between 10 and 24ci.  An autopilot pump is required to make a complete Reactor 40 Autopilot system.

Garmin’s GHP Reactor 40 Hydraulic Autopilot Corepack will keep you on course even in rough seas. Perfect for all types of hydraulically steered powerboats, the Reactor 40 provides reliable navigation in a easy to operate package. *Autopilot Pump and Display not included, Sold Separately.

The Simrad Pump-2 Reversible hydraulic gear pump is designed for boats up to 35ft. in length with a cylinder displacement of 4.9-15.2 cubic inches.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Simrad Pump-3 Reversible hydraulic gear pump is designed for boats up to 50ft. in length with a cylinder displacement of 9.8-33.5 cubic inches.
Order Now Through March 31, 2024 and Get Up To $4,000 Back from Simrad! Click here to View Rebate Details and Savings Tiers. Buy More, Save More!

The Sitex SP120CRF-2 Autopilot comes with a bright color display and is an ideal high performance autopilot for small to medium sized inboard boats with a cubic inch capacity of 18CI. Includes Rudder Feedback.

Garmin’s Kicker Autopilot is designed for small gasoline outboard motors up to 20HP. Includes a floating handheld remote and can be paired with an optional GHC 20 or compatible Garmin Chartplotter for control!

The Furuno NavPilot 300 provides you with a new tool to make your day on the water more relaxing or help you hunt fish more effectively. Packaged with all of the necessary components, cables and gateways to connect to a SeaStar Optimus 360 Joystick system.

The Furuno NavPilot 300 provides you with a new tool to make your day on the water more relaxing or help you hunt fish more effectively. Packaged with all of the necessary components, cables and gateways to connect to a Yamaha Helm Master system.

The Garmin Power Actuator Cable is required when connecting a third party pump to a Garmin autopilot.

Si-Tex Hydraulic Autopilot Hose Kit with Fittings, Part Number OC17SUK42.

Garmin’s Kicker Autopilot is designed for small gasoline outboard motors up to 20HP. Includes a Stainless Steel Tilt Tube for Yahama and Honda Outboards, floating handheld remote and can be paired with an optional GHC 20, compatible Garmin Chartplotter or NMEA2000 network compatible GPS system for control!

Large, 5-Inch, high resolution touch display for your compatible Garmin autopilot. The GHC 50 has a sleek, edge-to-edge glass display that matches current, high-end Garmin GPSMAP chartplotters. Wired and wireless remote-controlled options, plus Ethernet and WiFi Connectivity make the GHC 50 an advanced autopilot instrument display!
Requires a compatible Garmin autopilot, sold separately.

Garmin’s GHP Reactor 40 Hydraulic Autopilot Corepack with GHC 50 Autopilot Instrument will keep you on course even in rough seas. Perfect for all types of hydraulically steered powerboats, the Reactor 40 provides reliable navigation in a easy to operate package.
*Autopilot Pump is not included, Sold Separately.

Garmin’s Reactor 40 with GHC 50 and SmartPump V2 takes the guess work out of autopilots! With a SmartPump V2 that works with most boats and applications, the V2 pump reduces its size overall and provides for optimum control and performance!

Garmin’s Reactor 40 Mechanical/Retrofit/Solenoid Corepack is ideal for sailboats and powerboats with direct or cable-actuated steering systems and works with a wide variety of steering setups from Hydraulic, Cable-Drive, Mechanical or Solenoid. Includes Garmin GHC 50 Autopilot Instrument with 5" edge-to-edge glass display.